Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the flexibility of gas cooktops but needs an oven for baking? Discover a dual-fuel range cooker that offers the best of both worlds.
Gas cooktops are the preferred choice of many home chefs with expertise in the kitchen due to their superior temperature control. They also allow them to use advanced cooking techniques, such as charcoaling. These powerhouse stoves can be expensive, particularly when you need an additional gas hook-up and electrician to install it.
What is a 13amp outlet?
If you own dual fuel range cooker (also called an electric and gas oven) then you'll require an appropriate 13 amp plug. The plug should be wired by a certified electrician to the cooker ring.
This ensures that the current flowing through the plug is safe and not too high, which could cause an electrical fire risk. The plug is equipped with a fuse that controls the current. The fuse explodes whenever the current is beyond its capacity. This protects the appliance from over-charge of electricity.
The fuse is rated 13 amps, as indicated on the top of the plug. This is the maximum amount of current that the plug could carry without damaging the appliance or causing heat to the socket. When replacing fuses, it is important to use the same amp rating that was used in the original. There is a risk of overheating a socket if you replace a fuse using an unrelated rating.
A 13 amp fuse is likely to be a ceramic type, which is very durable and is able to withstand high temperatures produced by a range cooker. Ceramic elements are also fire-resistant and is therefore a better option than other kinds.
There are many ways that a 13 amp plug can be installed. The plug can be connected to a live socket by using screws or a plastic jaw cord clamp. The plug must be put in place with a firm push and then tightened, making sure the clamp is secure.
Before connecting the wires you may have to remove the cardboard wiring diagram that is positioned over the pins of certain plugs. It is vital that the wires be cut to the correct length as leaving them too long can result in them becoming crushed when the plug cover is replaced. The earth wire must be the longest one to ensure it is connected prior to the neutral and line pins.
How do I connect an outlet with 13amps?
The vast majority of dual cookers that use fuel in the UK are equipped with a 13 amp plug. This is vital because ovens draw a substantial current, while normal plug sockets have a rating of 10 amps.
In general new appliances should have a plug installed at the point-of-sale. This is to ensure compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug and this is the problem.
The first thing to consider when connecting a cooker with an existing plug socket is to ensure that the fuse rating of the fuse box is similar to the rating of the plug. This is crucial since a faulty sized fuse could pose a risk.
It is also recommended to ensure that the fuse is completely seated into the cartridge, and there is no excessive movement. The next step is to prepare the flex to be used. Take off the sheathing and reveal the three conductors insulated. Then, cut the sheathing near the point of entry to the plug (beyond the cord grip) using a knife, but without damaging the individual conductors that are insulated. This nick should be wide enough to allow the sheathing to split and enlarge the nick when it is pulled back revealing the cable underneath. Finally, cut off the excess sheathing and leave about 40mm extending beyond the flexing end.
The flex is placed over the plug, with the earth terminal on top and the live and neutral terminals at the bottom. Using the conductors with the colors to guide you, the sheathing is then removed from each pin, and the internal cable is then plugged to the appropriate terminal by using the cord grip. If the plug is fitted with a screw type cord clamp, loosen this and then pull back the insulation to reveal the copper conductors. Connect each wire insulated to the correct terminal using the plug's channel. Start with the earth conductor first, then the neutral and finally, the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw for a 13amp plug at 300 volts is 3kw. This is a large amount of power but the standard fuse on the UK plugtop won't fail until the cable reaches a dangerous temperature. It is crucial to be aware of the amount of power you are using in your kitchen as an unfit plug or socket can cause an explosion.
The fuse in plugtops is ceramic, approximately 25mm long and rated for 240V mains. The fuses will have a BS Kitemark or similar mark on the side and they'll contain sand. There are plastic or glass alternatives but they should not be used with a live plug, unless you want to blow the fuse and potentially be electrocuted!
The majority of dual fuel range cookers sold in the UK require hard-wired and cannot be plugged directly into an outlet on the wall. They are usually connected to a dedicated cooker ring circuit which is only suitable for appliances that consume up to 20 amps.
Examine the ring circuit in your home with the fuse box, or contact an electrician in your area. They will be able tell you if the sockets in your home are on the same ring or are separate and whether there is a dedicated circuit for your oven.
If you're in the market for a brand new dual fuel range cooker the size of your kitchen is a vital factor to take into account. We have a wide choice of cookers to fit any space, from compact 50 - 60cm dual fuel models and vast 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
We also have a wide range of multifunction gas and electric cookers. These multifunction cookers let you cook a variety of meals such as pasta, casseroles and curries.
Currys offers a variety of Cookers. Browse our online collection or visit us in store to view the range. We offer free installation at home and delivery on a selection of range cookers and flexible payment options. If you have any queries our team is ready to assist you - just drop us an email or give us a ring. Credit is subjected to status, and terms and conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot confusion regarding the maximum current draw for the cooker switch. Most cookers are hard-wired and connected to an oven-ring circuit, not a standard socket. This is due to the fact that they often draw more than 20 amps of power when both the gas hob and electric oven are used.
Therefore, you cannot find a dual fuel range cooker that could be connected to a standard socket as this would present a very dangerous fire hazard and is in violation of electrical regulations. An experienced electrician will install any new electrical wiring to a cooker in the kitchen and will make sure that the load (both the oven and hob) will not exceed the capacity of supply of that circuit.
The advantages of a dual fuel cooker are the receptive heat of a gas cooktop with the precision of an electric oven. range cookers uk are therefore a favorite among chefs as well as home cooks. If you're looking to test different cooking techniques such as searing and charcoaling, a dual fuel range cooker is the best choice.
When buying a new range cooker, you will need to consider various aspects such as size, functionality and cost. In addition, you will also need to make sure that your house has the right gas hook-up for the appliance. If you aren't sure then make an appointment with an appointment with a Gas Safe engineer to inspect your home prior to installing.
The Currys range of dual fuel range cookers offers options that can be adapted to a range of budgets, from basic models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something more sophisticated we have a selection of top JennAir models that feature several innovative features.
When you purchase a new dual fuel range cooker, it is essential to read the manual of the owner for specific information regarding the electrical and gas requirements. You will need an electric connection to your home. A plumber may be required to install it for you. Depending on the home, you will also need to ensure that you have a dedicated cooker ring circuit installed and approved by a licensed electrician.